Shop by Category

Knife Shims

  • Center Shim Pack 904114

    Center Shim Pack 904114

    This part is applicable to the following Shears: 2H 4H Due to changes from standard knife shims to hardened polished spring steel knife shims on the 375, 3750, 500, 5000, 750, 7500, 4SE, 6SE, 8SE, it will be necessary to call the Parts Department...

  • End Shim Pack 904113

    End Shim Pack 904113

    This part is applicable to the following Shears: 2H 4H Due to changes from standard knife shims to hardened polished spring steel knife shims on the 375, 3750, 500, 5000, 750, 7500, 4SE, 6SE, 8SE, it will be necessary to call the Parts Department...

  • Center Shim Pack 246133

    Center Shim Pack 246133

    Due to changes from standard knife shims to hardened polished spring steel knife shims on the 375, 3750, 500, 5000, 750, 7500, 4SE, 6SE, 8SE, it will be necessary to call the Parts Department to determine what type shims the machine uses. To determine...

  • End Shim Pack 246132

    End Shim Pack 246132

    Due to changes from standard knife shims to hardened polished spring steel knife shims on the 375, 3750, 500, 5000, 750, 7500, 4SE, 6SE, 8SE, it will be necessary to call the Parts Department to determine what type shims the machine uses. To determine...

  • Center Shim 243592

    Center Shim 243592

    Due to changes from standard knife shims to hardened polished spring steel knife shims on the 375, 3750, 500, 5000, 750, 7500, 4SE, 6SE, 8SE, it will be necessary to call the Parts Department to determine what type shims the machine uses. To determine...

  • End Shim 243591

    End Shim 243591

    Due to changes from standard knife shims to hardened polished spring steel knife shims on the 375, 3750, 500, 5000, 750, 7500, 4SE, 6SE, 8SE, it will be necessary to call the Parts Department to determine what type shims the machine uses. To determine...

  • Center Shim 243530

    Center Shim 243530

    Due to changes from standard knife shims to hardened polished spring steel knife shims on the 375, 3750, 500, 5000, 750, 7500, 4SE, 6SE, 8SE, it will be necessary to call the Parts Department to determine what type shims the machine uses. To determine...

  • End Shim 243529

    End Shim 243529

    Due to changes from standard knife shims to hardened polished spring steel knife shims on the 375, 3750, 500, 5000, 750, 7500, 4SE, 6SE, 8SE, it will be necessary to call the Parts Department to determine what type shims the machine uses. To determine...